Description
Brand:
World American
Combo Walking Floor (WFD) Dual Pressure- 3000 PSI Walking Floor, 2000 PSI For Dump Includes Air Shifter on Directional Control Valve 3 Line Systems Only Air Pressure Must Be 80 PSI Minimum To Operate The High/Low Pressure Relief Air Cylinder 24 GPM @ 1200 RPM 30.5 GPM @ 1500 RPM 49 GPM @ 1800 RPM The PTO Is Required To Operate At 130% Of The Engine Speed.
UPC:
00698231629659
California Proposition 65:
Cancer and Reproductive Harm – www.P65Warnings.ca.gov
27 GPM Hydraulic Pump, Left Hand Rotation Gear Pump with Air Shift
Flow Rate:
27 @ 1,000 RPM U.S. Gallons per mi
Fragile:
False
Inlet Port Thread Diameter:
1.5 Inch
Input Shaft Diameter:
0.875 Inch
Input Spline Quantity:
13
Kitsonly:
False
Maximum RPM:
3000 Revolutions per Minu
Maximum Working Pressure:
3000 Pounds per Square In
Mounting Type:
Remote
Pressure Port Diameter:
1 Inch
Pump Type:
Gear
Return Port Diameter:
1 Inch
Rotation Direction:
Left
Series Type:
C Series
Shift linkage Type:
Air
Specifications-1:
Combo Walking Floor (WFD) Dual Pressure- 3000 PSI Walking Floor, 2000 PSI For Dump Includes Air Shifter on Directional Control Valve 3 Line Systems Only Air Pressure Must Be 80 PSI Minimum To Operate The High/Low Pressure Relief Air Cylinder 24 GPM @ 1200 RPM 30.5 GPM @ 1500 RPM 49 GPM @ 1800 RPM The PTO Is Required To Operate At 130% Of The Engine Speed. In Most Applications The Engine RPM Is 1000 to 1200 RPM When Equipped W/ A our PTO, This Will Be A C Or E Ratio
Specifications-2:
2 Levels of Performance to Suit Your Needs -Standard Pump Features -Heavy duty roller bearings -Pressure balanced thrust plates -High pressure shaft seals -Aluminum detent cover -Factory set relief pressure -2 or 3 line configuration -Extended mounting studs -Doweled construction for higher pressure -Manual inspection of spool shaft and visual inspection of pump -Batch tested to assure proper flow, pressure, relief valve operation and overall efficiency Premium T Pump Features Heavy duty roller bearings Pressure balanced thrust plates -High pressure shaft seals -Aluminum detent cover -Factory set relief pressure -2 or 3 line configuration -Extended mounting studs -Doweled construction for higher pressure -Manual inspection of spool shaft and visual inspection of pump -Test is conducted at 1000 RPMS -Oil temperature is maintained at 100 degrees Fahrenheit -Relief valve at full flow to not exceed 2300 PSI In Order to Pass The Quality Test, The Pump Must Perform to The Following Specifications: -Minimum flow of 25 GPM at 1500 PSI -Relief valve maximum pressure differential (crack to full flow) to not exceed 250 PSI -Minimum overall volumetric efficiency at 92% or more -A copy of the computer generated test results is included with each pump
System Type:
3
Taxonomy A:
Hydraulics
Taxonomy B:
Pumps & Motors
Taxonomy C:
Combo Pump
Taxonomy D:
Assemblies
Thread Type:
NPT
Warranty Period:
1 Year
Replaces:
- PERMCO:
DG20-Z-L-AS-25-32 - OE Aftermarket:
DG20-Z-L-AS-25/32 - PERMCO:
DG20-Z-L-AS-2532 - Saginaw:
DG20ZL-AS2532 - PERMCO:
DG20ZLAS-25/32 - Vickers:
HHDG2DZLAS2532 - Metaris:
MHWFD2.0 - OE Aftermarket:
PMR-DG20-Z-L-AS-25/3 - Genuine Newstar:
PMR-DG20-Z-L-AS-25/32 - OE Aftermarket:
PMR-DG20-Z-L-AS-253 - OE Aftermarket:
PMRDG20ZLAS253 - OE Aftermarket:
PMRDG20ZLAS2532 - Genuine Newstar:
S-18732 - Genuine Newstar:
S18732 - OTR:
VPDP-C-20-Z-L-A25/32 - OTR:
VPDPC20ZLA2532 - OE Aftermarket:
WFD-2.0WAS
